Säkerhet och övervakning/Kameror/Inomhuskameras

SmartLife Inomhus Kamera

Wi-Fi | HD 720p | microSD (ingår inte) / Molnlagring (tillval) | Med rörelsesensor | Nattsikt | Vit

Egenskaper

Tillverkarens artikelnummer: WIFICI05CWT
Streckkod: 5412810290048
• Smart IP-kamera - reagerar automatiskt för att spela eller ljud i rummet
• HD-upplösning - för kristallklara inspelade bilder
• Lätt att ansluta direkt till Wi-Fi-nätverket - det krävs ingen separat hubb
• Tvåvägskommunikation - för att höra och prata med personer i rummet
• Fullt stöd från alla andra produkter i Nedis® SmartLife-serien.
Denna Nedis IP-kamera för smarta hem är ett självklart tillskott till smarta hemmasystem. Den ansluts direkt till Wi-Fi-nätverket - det krävs ingen ytterligare hubb - utlöses av rörelser och ljud i rummet.

Smart IP-kamera
Nu har hemautomation blivit enklare. Den här lättanvända kameran kan enkelt anslutas till ditt befintliga Wi-Fi-nätverk för att övervaka ljud eller rörelse i rum.
Den spelar in i HD-upplösning (1280 x 720 pixlar) för fullständig skärpa på de tagna bilderna. Dessutom är kameran lika kraftig på natten tack vare dess bildförstärkare, som ger ett avstånd på 5.0 m.
Kameran har stöd för microSD-kort på upp till 128 GB (medföljer ej) som ger massor av videoklippslagring. Dess flexibla, böjliga design gör att den kan placeras var som helst i rummet för att spela in en betraktningsvinkel på 110° tack vare 1/4-tums CMOS-sensorn.
En 3M självhäftande platta medföljer för att fästa på väggen i rummet

Om Nedis SmartLife
Upptäck ett stort och ständigt växande sortiment av produkter - såsom lampor, brytare, uttag, sensorer och kameror - som alla kan styras med en lättanvänd och intuitiv app
Oavsett om du letar efter en enda smart lampa eller kamera, eller om du vill automatisera hela huset, kan du upptäcka hur lättillgängligt smart teknik är i dag.

Förpackning

Paketet innehåller

IP camera
USB cable
Power adapter
Adhesive pad
Quick start guide

Storlek på förpackning Presentask med eurolock

Bredd Höjd Längd
67 mm 97 mm 140 mm

Förpackningsstorlek

Antal/kartong Bredd Höjd Längd Vikt
1 65 mm 95 mm 140 mm 187 g
40 330 mm 305 mm 405 mm 8200 g

Produktspecifikationer

Bredd 53 mm
Höjd 112 mm
Djup 50 mm
Vikt 107 g
Färg Vit
Inbygd mikrofon Ja
Enhetens ströminmatningsanslutning Micro USB
Ingångsström 1.0 A
Strömkabel sida B Micro USB
Strömbakel sida A USB
Typ av strömkälla Strömadapter
Material Plast
Moln inspelnings funktionalitet Ja
Integrerade högtalare Ja
Maximal upplösning HD 720p
Nattsikt 5 m
Megapixel 1 MPixel
Lins 4.0 mm
Strömkabel längd 2.00 m
Kompatibel med Nedis® SmartLife
Betraktningsvinkel 110 °
Bildchip 1/3" CMOS
LED 1
Tillbehör Nätadapter EU Kontakt
Självhäftande dyna
USB-kabel
Inspänning 5 V DC
Maximal ström konsumtion 2.5 W
Nätkontakt Euro
Maximal antennförstärkning 3 dBi
Maximal sändningseffekt 14 dBm
Med rörelsesensor Ja
App tillgänglig för Android™
IOS
Sänd frekvensområdet 2400 - 2483.5 MHz
Lagringstyp Molnlagring (tillval)
microSD (ingår inte)
Trådlös teknologi som stöds Wi-Fi
Drifttemperaturens omfång -20 - 50 °C
Antal varor i paketet 1 st.

Support

Vanliga frågor

Vi har hittat följande frågor åt dig på engelska

In the first screen of the Smart installation, select other on the top right.
Now select QR-Code.
Follow the steps in the app.
The camera will scan the QR code on your phone to install it.

No, it only works for the camera device you have subscribed it with.

Yes, Open te live stream of the camera.
Tap on Purchase VAS.
Here you can subcribe to the cloud storage service.
There is a 30 day free trail you can try.

No, unfortunately this is not possible at the moment.
Record and save the clips in the app itself (playback menu) and it will be saved to the ALBUM folder in the app.
From here you can save it to your mobile device.

Unfortunately it's currently not possible to access it this way.
We are looking to add this functionality in the future.

When you SD-Card or Memory is full, the oldest file will be overwritten.

You can bypass this error message.

- Click on OK and go on with the installation and follow the instructions.

Because your password or SSID is more than 20 characters, the QR-code that is generated by the app get smaller and it is more difficult for the camera too scan the QR-code.
The chance of errors while scanning are higher.

If the QR-code can't be scanned, you can use the SmartConfig mode.

tap "+" -> camera -> other (top right) -> SmartConfig and follow the steps in the app.
The length of your password/SSID does not matter when using this method.

Please try the EZ mode installation

Reset the camera by holding down the reset button until you hear the sound

Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation

No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.

Use a Class 10 SD card up to 128GB.
Avoid so called "Ultra" or "Extreme"cards.
These fast cards often have compatibility issues.

An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.

This optional Cloud service can be added per camera.
Each individual camera will need it's own subscription.

Go to the live view of the camera
Tap on playback
Scroll through the timeline until you found the clip you want to save.
It will start playing
Press record
When you have reached the end of what you want to record, press record again and it will be saved to your mobile device.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.

These type of cards can have compatibility issues and we recommend you use a regualr speed Class 10 card.