Sikkerhet og sikkerhet/Dørklokker/Video dørklokker

SmartLife Video Dør Telefon

Wi-Fi | Omformer | Full HD 1080p | Cloud Storage (valgfritt) / microSD (ikke inkludert) | IP54 | Med bevegelses sensor | Nattsyn | Grå / Sort

Egenskaper

Leverandør Delenummer: WIFICDP10GY
Strek nummer: 5412810311323
• Sender varsler til smarttelefonen hvis noen nærmer seg (bevegelsesdeteksjon) eller trykker på klokken
• Bevegelsesdeteksjon kan også deaktiveres (f.eks. hvis døren vender direkte ut mot gaten).
• Toveiskommunikasjon for å snakke med de besøkende uansett hvor du er.
• Full HD-opptak (1080p) og digital zoom på smarttelefonen for en detaljert visning.
• Drives av 12-24 V AC - bruk ledningene til den eksisterende ringeklokken.
• Opptak lagres på et MicroSD-kort på opptil 128 GB (medfølger ikke) - se igjen det som skjedde.
• Vinkeljustering medfølger for optimal visningsvinkel.
• Integrert i Nedis® SmartLife-appen.
• Kan utvides med trådløs dørklokke (WIFICDPC10BK - medfølger ikke), så du hører dørklokken når du er hjemme, uansett hvor telefonen er.
Med denne smarte ringeklokken med kamera fra Nedis SmartLife vet du alltid at det er noen ved døren, uansett hvor du er. Så snart den besøkende trykker på ringeklokken eller, takket være bevegelsesdeteksjon, til og med nærmer seg inngangsdøren, mottar du et varsel på smarttelefonen. Deretter kan du starte en videosamtale, be budet om å levere pakken hos naboen eller fortelle den selgeren at du ikke er interessert - alt uten å åpne døren.
Ettersom du kan svare fra hvor som helst i verden så lenge smarttelefonen din har Internett-forbindelse, øker dette også hjemmesikkerheten ved å få det til å se ut som om du er hjemme.
Full HD-kameraet (1080p) har en visningsvinkel på 130° og støtter nattsyn, slik at du kan se hvem som er ved døren 24 timer i døgnet.
Ingen grunn til bekymring hvis du ikke har tid til å åpne døren. Bildene lagres på et microSD-kort, slik at du kan se dem når som helst.
Den trådløs ringeklokken med kamera er enkel å installere ved å bruke kablene til den eksisterende ringeklokken. Inkludert vinkeljustering for alltid å montere ringeklokken i optimal posisjon.
Utvid denne ringeklokken med kamera med vår Nedis ringeklokkeenhet (WIFICDPC10BK) for å høre lyden selv om smarttelefonen er slått av.

Emballasje

Innholdet i pakken

Ringeklokke med kamera
Veggbrakett
Vinkeljusteringsadapter
Installasjonsmaterialer
Hurtigveiledning

Forpaknings størrelse Gaveeske med eurolock

Bredde Høyde Lengde
140 mm 93 mm 66 mm

Logistikk størrelse

Antall/kartong Bredde Høyde Lengde Vekt
1 70 mm 120 mm 140 mm 208 g
40 300 mm 360 mm 410 mm 8900 g

Produktspesifikasjoner

Bredde 44 mm
Høyde 28 mm
Dybde 114 mm
Vekt 112 g
Farge Sort
Grå
Maksimal antenneforsterkning for overføring 0 dBi
Input Current 1.0 A
Strømkabel side B Micro USB
Strømkabel side A USB
Materiale Plast
Maksimum forbruk strøm 4 W
Cloud innspilling funksjonalitet Ja
Kompatibel med Nedis® SmartLife
LED 1
Maksimum oppløsning Full HD 1080p
Nattsyn 10 m
Maksimal overføringseffekt 18 dBm
Linse 3.2 mm
Betraktningsvinkel 130 °
Med bevegelses sensor Ja
Justerbar volum Ja
Tilbehør Vinkeljustering
Enhetens inngangsforbindelse ® 2-wire
Strømkildetype Omformer
App tilgjengelig for Android™
IOS
Bildebrikke 1/2.9” CMOS
Send frekvensområdet 2400 - 2484 MHz
Kapsling IP54
Støttet trådløs teknologi Wi-Fi
Antall melodier 4 Melodier
Driftstemperaturområde -20 - 50 °C
Antall produkter i pakken 1 stk.
Lagringstype microSD (ikke inkludert)
Cloud Storage (valgfritt)
Inngangsspenning 12 - 24 V AC

Støtte

Vanlige spørsmål

Vi har funnet følgende spørsmål til deg på engelsk

This video doorbell can indeed be powered by the existing doorbell transformer (12 - 24 VA, 1A minimum on all Voltages). But it is necessary to bypass or remove the wired gong so that the video doorbell is connected directly and exclusively to the doorbell transformer.

This can be used to provide the camera with power during testing before mounting it next to the door.

No, it does not have an internal battery and it needs to be connected to power at all times.

No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.

The video doorbell does not receive enough power. Typically this is due to loss on the cables. A power supply with a higher Voltage and Amperage can compensate for this loss.

Plaats de gong zo dicht mogelijk bij de video deurbel tijdens de installatie
Druk kort op de knop van de gong zodat het blauwe lampje blijft knipperen. Als u meerdere heeft laat u ze allemaal knipperen.
Ga naar het menu van de deurbel zelf (tik op deurbel: live beeld > rechtsboven op "pen met streepje"
Ga naar instellingen bel
Als er reeds een menu staat (tone, volume etc) dan drukt u eerst op verwijderen
Druk dan op toevoegen.
Vrijwel direct verschijnt het menu.
Ga terug naar het hoofdmenu en test de deurbel.

- Go to the settings menu of the video doorbell

- Select doorbell settings

- Place the gong really close to the doorbell

- Give the button on the bottom of the gong a short press: the light will start flashing.

- Press the "add" button in the app (remove the tone/volume menu first if it is already there)

- The menu will appear.

- Select another tone and ring the doorbell to test

See if it resets if you connect it to a USB charger. If it does, then you will need to replace the power supply. The current power supply is not able to get enough power to the video doorbell.

Your power supply can't provide enough power to the WIFICDP10GY. Please upgrade your power supply to compensate for the loss of the cables. We recommend a 12VAC/1A or higher power supply.

An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.

No, unfortunately this is not possible at the moment.
Record and save the clips in the app itself (playback menu) and it will be saved to the ALBUM folder in the app.
From here you can save it to your mobile device.

Unfortunately it's currently not possible to access it this way.
We are looking to add this functionality in the future.

Yes you can, simply install them like you would install a single one.
The difference is that you need to make all the gongs blink at the same time before you press add in the app.

No, you can't change the volume of the doorbell.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

If your phone is locked, you will only get a notification.
You can tap on this notification to go directly to the live view of the doorbell.
If the app is opened, you will get a screen as if someone is calling you.

The port is located on the bottom of the doorbell.
Use this port with a micro USB charger to install it indoors.
After it's installed you can mount it on the door again.

These type of cards can have compatibility issues and we recommend you use a regualr speed Class 10 card.

Please try the EZ mode installation

Reset the camera by holding down the reset button until you hear the sound

Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation

Use a Class 10 SD card up to 128GB.
Avoid so called "Ultra" or "Extreme"cards.
These fast cards often have compatibility issues.

You can add maximum 20 members.

This optional Cloud service can be added per camera.
Each individual camera will need it's own subscription.

Go to the live view of the camera
Tap on playback
Scroll through the timeline until you found the clip you want to save.
It will start playing
Press record
When you have reached the end of what you want to record, press record again and it will be saved to your mobile device.

You can bypass this error message.

- Click on OK and go on with the installation and follow the instructions.

Because your password or SSID is more than 20 characters, the QR-code that is generated by the app get smaller and it is more difficult for the camera too scan the QR-code.
The chance of errors while scanning are higher.

If the QR-code can't be scanned, you can use the SmartConfig mode.

tap "+" -> camera -> other (top right) -> SmartConfig and follow the steps in the app.
The length of your password/SSID does not matter when using this method.

Yes, Open te live stream of the camera.
Tap on Purchase VAS.
Here you can subcribe to the cloud storage service.
There is a 30 day free trail you can try.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.