Connectique/Énergie/Interrupteur mural

Commutateur mural SmartLife

Wi-Fi | Obturateur / Parasol / Rideau | Montage mural | 300 W | Android™ / IOS | Verre | Blanc

Caractéristiques

Référence Constructeur: WIFIWC10WT
Code EAN: 5412810272839
• Permet un contrôle via les boutons tactiles, à distance et automatiquement : pour vous donner le contrôle
• S'intègre à Google Home et Amazon Alexa : pour vous donner l'option de commande vocale
• Facile à configurer : se connecte directement à votre routeur Wi-Fi
• Peut être contrôlé par une programmation horaire ou couplé avec d'autres appareils connectés : pour permettre un fonctionnement automatique ou vous donner le contrôle de plusieurs appareils à la fois
• Lampe torche discrète : pour vous aider à trouver l'interrupteur dans l'obscurité
Ouvrez et fermez vos rideaux, volets et stores bannes électriques depuis votre smartphone, tablette ou tout dispositif de commande vocale domestique, tel qu'Amazon Alexa ou Google Home. Ce Contrôleur de Rideau Intelligent peut également être configuré pour fonctionner lorsque d'autres appareils Nedis SmartLife sont allumés et éteints, pour que vos rideaux se ferment lorsqu'une lumière s'allume, par exemple.

Facile à configurer
Le Contrôleur de Rideau Intelligent est simple à configurer, se connectant sans fil à votre routeur Wi-Fi et ne nécessitant pas de hub séparé.

Discret
Sa surface avant vitrée élégante et facile à nettoyer se fond dans votre intérieur, et pourtant, cette unité discrète est assez puissante pour prendre en charge des systèmes allant jusqu'à 300 W.

Planification et couplage
L'application proposée par les cerveaux se cachant derrière ce Contrôleur de Rideau Intelligent vous permet de configurer intuitivement la programmation horaire d'ouverture et de fermeture de vos rideaux (idéal pour la vie quotidienne et excellent dispositif de sécurité si vous n'êtes pas chez vous) ainsi que de le coupler à d'autres produits pour créer votre propre système Smart Home connecté.

À propos de Nedis SmartLife
Découvrez une gamme de produits toujours plus étendue (ampoules, commutateurs, prises, capteurs et caméras), pouvant tous être contrôlés via une application simple d'utilisation et intuitive. Avec des fonctions de commande vocale prises en charge par Amazon Alexa et Google Home, et sans rien de plus que votre réseau Wi-Fi existant, le Smart Home connecté n'a jamais été aussi simple.
Que vous recherchiez une ampoule ou prise intelligente, ou souhaitiez automatiser toute votre maison, découvrez à quel point la technique intelligente est accessible aujourd'hui.

Emballage

Contenu de l'emballage

Interrupteur mural intelligent
Guide de démarrage rapide

Dimensions emballage retail Boîte cadeau avec eurolock

Largeur Hauteur Longueur
50 mm 125 mm 105 mm

Dimensions logistiques

Conditionné par Largeur Hauteur Longueur Poids
1 50 mm 150 mm 110 mm 184 g
50 280 mm 285 mm 545 mm 9600 g

Spécifications du produit

Largeur 35 mm
Hauteur 85 mm
Profondeur 85 mm
Poids 131 g
Couleur Blanc
Voyant Oui
Type de source d'alimentation Alimentation secteur
Compatible avec Nedis® SmartLife
Gain d'antenne d'émission maximal 2 dBi
Matériau Verre
Courant de sortie 1.0 A
Puissance de sortie 300 W
Application disponible pour Android™
IOS
Courant d'entrée 10 A
Puissance d'émission maximale 19 dBm
Profondeur interne 26 mm
Ecart de perforation plaque de montage 60 mm
Montage Montage mural
Consommation électrique maximale 0.3 W
Tension d'entrée 100 - 240 V AC 50 Hz
Connexion (s) de sortie d'alimentation de l'appareil Parasol
Obturateur
Rideau
Technologie sans fil sountenu Wi-Fi
Nombre de produits dans l'emballage 1 pièces
Plage de température de fonctionnement -10 - 45 °C
Plage de fréquences de transmission 2412 - 2462 MHz

Assistance

Questions fréquemment posées

Nous avons trouvé les questions suivantes pour vous en anglais

Om de wifi slimme schakelaar te laten werken heeft u een neutraal nodig in de inbouwdoos. Dit zijn we in Nederland niet gewend.
Om dit snel en makkelijk op te lossen raden wij u aan, om aan de bestaande zwarte draad bij uw lamp of gordijn een nieuwe zwarte draad en nieuwe blauwe draad te plakken en deze via uw inbouwdoos door te trekken.

De nieuwe blauwe draad sluit u aan op de bestaande blauwe draad bij uw lamp aansluitpunt en op de "N" van uw slimme schakelaar.

When your motor does not have an automatic stop.
We recommend you to make an automation like:

Condition
- when the button ^ is pushed.

Task
- switch ^on
- delay "x" seconds (replace x for the number of seconds)
- stop / pause

Here are the steps you need to take to make it work perfectly.

First, create scenarios for open and close.

In the main screen > scenarios > + > Run device > choose switch 1 > open
Add a task
Run device > choose switch 1 > delay > specify the time the shutter needs to go from fully closed to fully open.
Add a task
Execute device > choose switch 1 > pause
Now give this scene a name that you would also use as a voice command (be specific) such as "window front open" or "window bedroom open" (this also helps later with control via Google)
Save.

Now create another scenario but this time for completely closed
In the main screen > scenarios > + > Run device > choose switch 1 > close/close
Add a task
Run device > choose switch 1 > delay > enter the time required for the shutter to go from fully open to fully closed.
Add a task
Execute device > choose switch 1 > pause
Now give this scene a name that you would also use as a voice command (be specific) such as "window front closed" or "window bedroom closed" (this also helps later with control via Google)
Also use similar commands for each window.
Save.

Repeat for every other switch you have.

Now go to Google Home.
Add the "Nedis Smartlife" service.
After refreshing, available Nedis products will be added to Google Home

Now create a Routine
Use your own voice command as a trigger
Then enter (in this example) "Hey Google Window For Open"
Run a smart home device as the task
Scroll down and choose the scene "Window For Open"
Save

Now create a Routine for each scene.

Of course you can also create 2 routines for "All Open" and "All Closed".
You then use all scenes for open or close as a task (add multiple tasks)

You can also add multiple voice commands to a Routine if you ever want to give commands in a different way.

This way it works every time in Google Home and you also always have the scenarios in the app that you can use as buttons to manually control something with a single button press.

You need a neutral wire at your switch connection point.
So you need a blue , brown and black wire in your connection point.

If you have no blue wire (neutral) you have to make this.

We advise you to use the existing black wire, tape a blue and a new black wire to the existing black wire and pull the wires towards your lamp. Connect the new blue wire to the existing blue wire and reconnect the black wire.

To control your Nedis SmartLife products with Google Assistant, you need to assign your Smart Life products in a room also in Google home.

1. Start the Google home app.
2. choose Settings
3. choose More Settings
4. Go to the tab off your home.
5. If a device is not assigned to room, tab on the device name and assign it to a room.

Now, you can control your devices by Google home products.


Add the "Smart Life" service to Google Home (no Nedis in the name).

Go in Google Home to Assistent -> Home Control and choose here "Smart Life" as service.

Use the Login details of the "Nedis Smartlife" app.
Compatible Nedis SmartLife products will then be added to Google Home.

An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.

You can add maximum 20 members.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.