SmartLife Smart Plug

Wi-Fi | Effektmåler | 3680 W | EU stik / Type F (CEE 7/7) | -20 - 50 °C | Android™ / IOS | Hvid

Funktioner

Producentens varenummer: WIFIP120FWT
EAN nummer: 5412810269952
• Kan bruges som et enkeltstående produkt eller kan nemt tilsluttes andre Nedis® SmartLife produkter
• Giver mulighed for fjernstyring og automatisering - for at opstille tidsplaner og linke apparater
• Understøtter stemmestyring - kombineret med Amazon Alexa eller Google Home
Fjernstyr mange elektriske apparater ved blot at slutte dem til dette trådløse, intelligente stik og forbinde dem med din smartphone eller tablet via din Wi-Fi-router. Den praktiske strømskærm giver dig mulighed for at få et overblik over, præcis hvor meget strøm apparatet aktuelt bruger, eller hvor meget strøm det har brugt over tid.

Let opsætning
Du behøver ikke at være et teknisk geni eller elektriker for at kunne fjernstyre og automatisere tilsluttede apparater og enheder. Alt, hvad du rent faktisk behøver, er et intelligent stik og din Wi-Fi-router. Vores intuitive app giver dig mulighed for at tænde og slukke for apparater via fjernbetjening og automatisk. Den kan tilmed arbejde sammen med stemmestyringssystemer som f.eks. Amazon Alexa eller Google Home.

Planlæg og foretag parring
Konfigurer tidsplaner, så stikket tænder for apparater, eller slut dem til andre enheder for at skabe omgivende scener, der kan aktiveres med en enkelt kommando eller et tryk på en knap.

Overvåg strømforbruget
Identificer hurtigt alle apparater, der bruger for meget strøm, for at sikre, at du bor i et intelligent og energieffektivt hjem.

Om Nedis SmartLife
Oplev et stort og stadigt voksende udvalg af produkter - som f.eks. pærer, kontakter, fatninger, sensorer og kameraer - der alle kan styres via en brugervenlig og intuitiv app. Med stemmestyringsfunktioner understøttet af Amazon Alexa og Google Home, hvor der er ikke behov for andet end dit eksisterende Wi-Fi-netværk, er dette det forbundne, intelligente hjem på den nemme måde.
Uanset om du er på udkig efter en enkelt intelligent pære eller fatning, eller du vil automatisere hele huset, kan du her opleve, hvor tilgængelig intelligent teknologi er i dag.

Emballage

Pakkens indhold

Smart-plug
Lynvejledning

Detail mål på pakker Gaveæske med eurolock

Bredde Højde Længde
103 mm 157 mm 61 mm

Logistik dimensionerne

Pakket per Bredde Højde Længde Vægt
1 105 mm 150 mm 60 mm 159 g
5 115 mm 140 mm 325 mm 900 g
40 340 mm 300 mm 465 mm 7680 g

Produktspecifikationer

Bredde 55 mm
Højde 100 mm
Dybde 75 mm
Vægt 104 g
Farve Hvid
Materiale Plastik
Kompatibel med Nedis® SmartLife
Maksimal transmissionsantenneforstærkning 2 dBi
Effektmåler Ja
Enhedens strømindgangsforbindelse Hybrid (CEE 7/7)
Maksimal transmissionseffekt 15.73 dBm
Udgangseffekt 3680 W
Indgangsstrøm 16 A
App tilgængelig til Android™
IOS
Frekvensområde 2412 - 2472 MHz
Stik Type F (CEE 7/7)
Emballagetype Gift Box with Euro Lock
Slags jordforbindelse EU stik
Enhedens strømudgangsforbindelse EU stik / Type F (CEE 7/7)
Understøttet trådløs teknologi Wi-Fi
Driftstemperaturområde -20 - 50 °C
Indgangsspænding 230 V AC

Support

Ofte stillede spørgsmål

Vi har fundet følgende spørgsmål til dig på engelsk

Go to the settings menu of the plug > remove device and data
Then go to Profile > settings > clear cache
Now reset the plug and add it back to the app

To control your Nedis SmartLife products with Google Assistant, you need to assign your Smart Life products in a room also in Google home.

1. Start the Google home app.
2. choose Settings
3. choose More Settings
4. Go to the tab off your home.
5. If a device is not assigned to room, tab on the device name and assign it to a room.

Now, you can control your devices by Google home products.


Nedis Smart plugs are designed and tested to be used as power supply for consumer products. Since there are no applicable standards developed yet Nedis Smart plugs are not designed and not tested to be used as a feed-in component into a power grid and/or to be used in combination with solar (balcony) panels.

Nedis Smart plugs are designed and tested to be used as power supply for consumer products. Since there are no applicable standards developed yet Nedis Smart plugs are not designed and not tested to be used as a feed-in component into a power grid and/or to be used in combination with solar (balcony) panels.

Please try the AP mode.

Make sure that you use a 2.4Ghz wifi network.

Reset the plug so it blinks slow.

If it blinks fast, reset it again and it will blink slowly



In the app:

+ > [your device] > tap on EZ mode and select AP mode > confirm it was reset > fill in the info of your wifi network > follow the steps in the app.



Hold your phone very close to the plug during the installation

This method uses a direct connection to the device to send the info of your wifi to it.

Holding it close optimises this connection

Add the "Smart Life" service to Google Home (no Nedis in the name).

Go in Google Home to Assistent -> Home Control and choose here "Smart Life" as service.

Use the Login details of the "Nedis Smartlife" app.
Compatible Nedis SmartLife products will then be added to Google Home.

An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.

You can add maximum 20 members.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.

Vis alle produkter i: